MAX933ESA Datasheet Download

Part No.:
MAX933ESA
Download:
Download Datasheet
Description:
[Ultra Low-Power, Low-Cost Comparators with 2eference]
File Size:
166 K
Page:
16 Pages
Logo:
Manufacturer:
MAXIM [ MAXIM INTEGRATED PRODUCTS ]
PCB Prototype
 MAX933ESA Datasheet Page:2MAX933ESA Datasheet Page:3MAX933ESA Datasheet Page:4MAX933ESA Datasheet Page:5MAX933ESA Datasheet Page:6MAX933ESA Datasheet Page:7MAX933ESA Datasheet Page:8MAX933ESA Datasheet Page:9 
19-0194; Rev 1; 2/97
Ultra Low-Power, Low-Cost
Comparators with 2% Reference
_______________General Description
The MAX931-MAX934 single, dual, and quad micropower,
low-voltage comparators plus an on-board 2% accurate
reference feature the lowest power consumption available.
These comparators draw less than 4µA supply current
over temperature (MAX931), and include an internal
1.182V ±2% voltage reference, programmable hysteresis,
and TTL/CMOS outputs that sink and source current.
Ideal for 3V or 5V single-supply applications, the
MAX931-MAX934 operate from a single +2.5V to +11V
supply (or a ±1.25V to ±5V dual supply), and each
comparator’s input voltage range extends from the
negative supply rail to within 1.3V of the positive supply.
The MAX931-MAX934’s unique output stage continuously
sources as much as 40mA. And by eliminating power-
supply glitches that commonly occur when comparators
change logic states, the MAX931-MAX934 minimize
parasitic feedback, which makes them easier to use.
The single MAX931 and dual MAX932/MAX933 provide a
unique and simple method for adding hysteresis without
feedback and complicated equations, using the HYST pin
and two resistors.
For applications that require increased precision with
similar power requirements, see the MAX921-MAX924 data
sheet. These devices include a 1% precision reference.
INTERNAL COMPARATORS
INTERNAL
2%
PER
HYSTERESIS
REFERENCE
PACKAGE
PACK-
AGE
____________________________Features
o
Ultra-Low 4µA Max Quiescent Current
Over Extended Temp. Range (MAX931)
o
Power Supplies:
Single +2.5V to +11V
Dual ±1.25V to ±5.5V
o
Input Voltage Range Includes Negative Supply
o
Internal 1.182V ±2% Bandgap Reference
o
Adjustable Hysteresis
o
TTL-/CMOS-Compatible Outputs
o
12µs Propagation Delay (10mV Overdrive)
o
No Switching Crowbar Current
o
40mA Continuous Source Current
o
Available in Space-Saving µMAX Package
MAX931-MAX934
______________Ordering Information
PART
MAX931CPA
MAX931CSA
MAX931CUA
MAX931EPA
MAX931ESA
TEMP. RANGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
8 Plastic DIP
8 SO
8 µMAX
8 Plastic DIP
8 SO
PART
MAX931
Yes
1
Yes
8-Pin
DIP/SO/
µMAX
8-Pin
DIP/SO/
µMAX
8-Pin
DIP/SO/
µMAX
16-Pin
DIP/SO
Ordering Information continued on last page.
For similar devices guaranteed over the military temp. range, see
the MAX921-MAX924 data sheet. The MAX931, MAX933, and
MAX934 are pin-compatible with the 1% accurate MAX921,
MAX923, and MAX924, respectively. The MAX932 and
MAX922 are not pin-compatible.
MAX932
Yes
2
Yes
__________Typical Operating Circuit
V
IN
7
3 IN+
V+
OUT 8
4 IN-
MAX933
Yes
2
Yes
MAX934
Yes
4
No
________________________Applications
Battery-Powered Systems
Threshold Detectors
Window Comparators
Oscillator Circuits
Alarm Circuits
5 HYST
6 REF
V-
2
MAX931
GND
1
THRESHOLD DETECTOR
1
________________________________________________________________
Maxim Integrated Products
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800