MAX668EUB Datasheet Download

Part No.:
MAX668EUB
Download:
Download Datasheet
Description:
[1.8V to 28V Input, PWM Step-Up Controllers in μMAX]
File Size:
332 K
Page:
18 Pages
Logo:
Manufacturer:
MAXIM [ MAXIM INTEGRATED PRODUCTS ]
PCB Prototype
 MAX668EUB Datasheet Page:2MAX668EUB Datasheet Page:3MAX668EUB Datasheet Page:4MAX668EUB Datasheet Page:5MAX668EUB Datasheet Page:6MAX668EUB Datasheet Page:7MAX668EUB Datasheet Page:8MAX668EUB Datasheet Page:9 
19-4778; Rev 2; 1/12
IT
TION K
VALUA
E
BLE
AVAILA
1.8V to 28V Input, PWM Step-Up
Controllers in µMAX
Features
o
o
o
o
o
o
1.8V Minimum Start-Up Voltage (MAX669)
Wide Input Voltage Range (1.8V to 28V)
Tiny 10-Pin
µMAX
Package
Current-Mode PWM and Idle Mode™ Operation
Efficiency over 90%
Adjustable 100kHz to 500kHz Oscillator or
SYNC Input
o
220µA Quiescent Current
o
Logic-Level Shutdown
o
Soft-Start
General Description
The MAX668/MAX669 constant-frequency, pulse-width-
modulating (PWM), current-mode DC-DC controllers are
designed for a wide range of DC-DC conversion applica-
tions including step-up, SEPIC, flyback, and isolated-
output configurations. Power levels of 20W or more can
be controlled with conversion efficiencies of over 90%.
The 1.8V to 28V input voltage range supports a wide
range of battery and AC-powered inputs. An advanced
BiCMOS design features low operating current (220µA),
adjustable operating frequency (100kHz to 500kHz),
soft-start, and a SYNC input allowing the MAX668/
MAX669 oscillator to be locked to an external clock.
DC-DC conversion efficiency is optimized with a low
100mV current-sense voltage as well as with Maxim’s
proprietary Idle Mode™ control scheme. The controller
operates in PWM mode at medium and heavy loads for
lowest noise and optimum efficiency, then pulses only as
needed (with reduced inductor current) to reduce oper-
ating current and maximize efficiency under light loads.
A logic-level shutdown input is also included, reducing
supply current to 3.5µA.
The MAX669, optimized for low input voltages with a
guaranteed start-up voltage of 1.8V, requires boot-
strapped operation (IC powered from boosted output). It
supports output voltages up to 28V. The MAX668 oper-
ates with inputs as low as 3V and can be connected in
either a bootstrapped or non-bootstrapped (IC powered
from input supply or other source) configuration. When
not bootstrapped, it has no restriction on output voltage.
Both ICs are available in an extremely compact 10-pin
µMAX package.
MAX668/MAX669
Applications
Cellular Telephones
Telecom Hardware
LANs and Network Systems
POS Systems
Ordering Information
PART
MAX668EUB
MAX669EUB
MAX669EUB/V+T
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
10 µMAX
10 µMAX
10 µMAX
Idle Mode is a trademark of Maxim Integrated Products.
+ Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
/V Denotes an automotive qualified part.
Note:
Devices are also available in a lead(Pb)-free/RoHS-com-
pliant package. Specify lead-free by adding “+” to the part
number when ordering.
Typical Operating Circuit
V
IN
= 1.8V to 28V
Pin Configuration
TOP VIEW
V
OUT
= 28V
SYNC/
SHDN
FREQ
V
CC
EXT
CS+
LDO
1
FREQ
GND
2
3
4
5
10
SYNC/SHDN
9
V
CC
EXT
PGND
CS+
MAX668
MAX669
8
7
6
MAX669
LDO
PGND
FB
REF
GND
REF
FB
µMAX
________________________________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.