CY7C63413C-PVXC Datasheet Download

Part No.:
CY7C63413C-PVXC
Download:
Download Datasheet
Description:
[Low-Speed High I/O, 1.5-Mbps USB Controller]
File Size:
1264 K
Page:
32 Pages
Logo:
Manufacturer:
CYPRESS [ CYPRESS SEMICONDUCTOR ]
PCB Prototype
 CY7C63413C-PVXC Datasheet Page:2CY7C63413C-PVXC Datasheet Page:3CY7C63413C-PVXC Datasheet Page:4CY7C63413C-PVXC Datasheet Page:5CY7C63413C-PVXC Datasheet Page:6CY7C63413C-PVXC Datasheet Page:7CY7C63413C-PVXC Datasheet Page:8CY7C63413C-PVXC Datasheet Page:9 
CY7C63413C
CY7C63513C
CY7C63613C
Low-Speed High I/O, 1.5-Mbps USB Controller
Features
• Low-cost solution for low-speed applications with high
I/O requirements such as keyboards, keyboards with
integrated pointing device, gamepads, and many
others
• USB Specification Compliance
— Conforms to USB Specification, Versions 1.1 and 2.0
— Conforms to USB HID Specification, Version 1.1
— Supports 1 device address and 3 data endpoints
— Integrated USB transceiver
• 8-bit RISC microcontroller
— Harvard architecture
— 6-MHz external ceramic resonator
— 12-MHz internal CPU clock
• Internal memory
— 256 bytes of RAM
— 8 Kbytes of EPROM
• Interface can auto-configure to operate as PS2 or USB
• I/O port
— The CY7C63413C/513C have 24 General Purpose I/O
(GPIO) pins (Port 0 to 2) capable of sinking 7 mA per
pin (typical)
— The CY7C63613C has 12 General Purpose I/O (GPIO)
pins (Port 0 to 2) capable of sinking 7 mA per pin
(typical)
— The CY7C63413C/513C have eight GPIO pins (Port
3) capable of sinking 12 mA per pin (typical) which
can drive LEDs
— The CY7C63613C has four GPIO pins (Port 3) capable
of sinking 12 mA per pin (typical) which can drive
LEDs
— Higher current drive is available by connecting
multiple GPIO pins together to drive a common
output
— Each GPIO port can be configured as inputs with
internal pull-ups or open drain outputs or traditional
CMOS outputs
— The CY7C63513C has an additional eight I/O pins on
a DAC port which has programmable current sink
outputs
— Maskable interrupts on all I/O pins
• 12-bit free-running timer with one microsecond clock
ticks
• Watch Dog Timer (WDT)
• Internal Power-On Reset (POR)
• Improved output drivers to reduce EMI
• Operating voltage from 4.0V to 5.5V DC
• Operating temperature from 0 to 70 degrees Celsius
• CY7C63413C available in 40-pin PDIP, 48-pin SSOP, 48-
pin SSOP - Tape reel, all in Lead-Free versions for
production
• CY7C63513C available in 48-pin SSOP Lead-Free
packages for production
• CY7C63613C available in 24-pin SOIC Lead-Free
packages for production
• Industry-standard programmer support
Functional Overview
The CY7C63413C/513C/613C are 8-bit RISC One Time
Programmable (OTP) microcontrollers. The instruction set has
been optimized specifically for USB operations, although the
microcontrollers can be used for a variety of non-USB
embedded applications.
The CY7C63413C/513C features 32 General-Purpose I/O
(GPIO) pins to support USB and other applications. The I/O
pins are grouped into four ports (Port 0 to 3) where each port
can be configured as inputs with internal pull-ups, open drain
outputs, or traditional CMOS outputs. The CY7C63413C/513C
have 24 GPIO pins (Ports 0 to 2) that are rated at 7 mA typical
sink current. The CY7C63413C/513C has 8 GPIO pins (Port
3) that are rated at 12 mA typical sink current, which allows
these pins to drive LEDs.
The CY7C63613C features 16 General-Purpose I/O (GPIO)
pins to support USB and other applications. The I/O pins are
grouped into four ports (Port 0 to 3) where each port can be
configured as inputs with internal pull-ups, open drain outputs,
or traditional CMOS outputs. The CY7C63613C has 12 GPIO
pins (Ports 0 to 2) that are rated at 7 mA typical sink current.
The CY7C63613C has 4 GPIO pins (Port 3) that are rated at
12 mA typical sink current, which allows these pins to drive
LEDs.
Multiple GPIO pins can be connected together to drive a single
output for more drive current capacity. Additionally, each I/O
pin can be used to generate a GPIO interrupt to the microcon-
troller. Note the GPIO interrupts all share the same “GPIO”
interrupt vector.
The CY7C63513C features an additional 8 I/O pins in the DAC
port. Every DAC pin includes an integrated 14-Kohm pull-up
resistor. When a “1” is written to a DAC I/O pin, the output
current sink is disabled and the output pin is driven high by the
internal pull-up resistor. When a “0” is written to a DAC I/O pin,
the internal pull-up is disabled and the output pin provides the
programmed amount of sink
current. A DAC I/O pin can
be used as an input with an
internal pull-up by writing a
“1” to the pin.
Cypress Semiconductor Corporation
Document #: 38-08027 Rev. *B
198 Champion Court
San Jose
,
CA 95134-1709
408-943-2600
Revised January 6, 2006