CY7C025-15AC Datasheet Download

Part No.:
Download Datasheet
[4K x 16/18 and 8K x 16/18 Dual-Port Static RAM with SEM, INT, BUSY]
File Size:
518 K
21 Pages
PCB Prototype
 CY7C025-15AC Datasheet Page:2CY7C025-15AC Datasheet Page:3CY7C025-15AC Datasheet Page:4CY7C025-15AC Datasheet Page:5CY7C025-15AC Datasheet Page:6CY7C025-15AC Datasheet Page:7CY7C025-15AC Datasheet Page:8CY7C025-15AC Datasheet Page:9 
4K x 16/18 and 8K x 16/18 Dual-Port
Static RAM with SEM, INT, BUSY
Functional Description
The CY7C024/024A/0241 and CY7C025/0251 are low power
CMOS 4K x 16/18 and 8K x 16/18 dual-port static RAMs. Various
arbitration schemes are included on the CY7C024/ 0241 and
CY7C025/0251 to handle situations when multiple processors
access the same piece of data. Two ports are provided,
permitting independent, asynchronous access for reads and
writes to any location in memory. The CY7C024/ 0241 and
CY7C025/0251 can be used as standalone 16 or 18-bit dual-port
static RAMs or multiple devices can be combined to function as
a 32-/36-bit or wider master/ slave dual-port static RAM. An M/S
pin is provided for implementing 32-/36-bit or wider memory
applications without the need for separate master and slave
devices or additional discrete logic. Application areas include
interprocessor/multiprocessor designs, communications status
buffering, and dual-port video/graphics memory.
Each port has independent control pins: Chip Enable (CE), Read
or Write Enable (R/W), and Output Enable (OE). Two flags are
provided on each port (BUSY and INT). BUSY signals that the
port is trying to access the same location currently being
accessed by the other port. The Interrupt Flag (INT) permits
communication between ports or systems by means of a mail
box. The semaphores are used to pass a flag, or token, from one
port to the other to indicate that a shared resource is in use. The
semaphore logic is comprised of eight shared latches. Only one
side can control the latch (semaphore) at any time. Control of a
semaphore indicates that a shared resource is in use. An
automatic power down feature is controlled independently on
each port by a chip select (CE) pin.
The CY7C024/024A/0241 and CY7C025/0251 are available in
84-pin Pb-free PLCCs, 84-pin PLCCs (CY7C024 and CY7C025
only), 100-pin Pb-free Thin Quad Plastic Flatplack (TQFP), and
100-pin Thin Quad Plastic Flatpack.
True dual-ported memory cells, which allow simultaneous
reads of the same memory location
4K x 16 organization (CY7C024/024A
4K x 18 organization (CY7C0241)
8K x 16 organization (CY7C025)
8K x 18 organization (CY7C0251)
0.65 micron CMOS for optimum speed and power
High speed access: 15 ns
Low operating power: I
= 150 mA (typ)
Fully asynchronous operation
Automatic power down
Expandable data bus to 32/36 bits or more using Master/Slave
chip select when using more than one device
On-chip arbitration logic
Semaphores included to permit software handshaking
between ports
INT flag for port-to-port communication
Separate upper-byte and lower-byte control
Pin select for Master or Slave
Available in 84-pin (Pb-free) PLCC, 84-pin PLCC, 100-pin
(Pb-free) TQFP, and 100-pin TQFP
1. CY7C024 and CY7C024A are functionally identical.
Cypress Semiconductor Corporation
Document #: 38-06035 Rev. *D
198 Champion Court
San Jose
CA 95134-1709
Revised December 09, 2008